- Offers outstanding print quality for normal and rotated bar codes
- Superior resistance to abrasion, steam, heat (150C on polyester, 300C on
polyimide), and a variety of chemicals including, but not limited to:
- Gasoline
- Mineral spirits
- Engine oil
- Bleach
- Isopropyl alcohol
- Human skin oil
- Antifreeze
- Sulfuric acid
- Reduced energy requirements extend printhead life
- Recognized by U.L. and CSA on various label stocks
- Designed for harsh environment labeling applications:
- Textile and apparel applications
- Product and care tag labeling
- Nursery and lumber applications
- Chemical drum labeling
- Medical and pharmaceutical labeling
- Outdoor applications
- Work-in-process and asset labeling
- Automotive applications
- Recommended Media:
- Polyethylene and polypropylene films
- Polyester and polyimide films
- Vinyl
| Technical Specifications |
| Film Thickness: | 4.5 Microns | |
| Total Ribbon Thickness: | 8 Microns | |
| Transmission Density: | 1.0 MacBeth Scale | |
| Ink Melting Point: | 110º C 230º F |
|
| Recommended Maximum Print Speed: | 6 IPS |
| Star Diagram |
This diagram is representative of SP-330 used in super premium applications when printing on synthetic films.
| Storage Conditions |
To ensure optimal performance, please adhere to the following environmental conditions for use, shipping, and storage.
- For optimal print results, thermal transfer printing should occur in the temperature range of 5º C (41º F) to 35º C (95º F) at 45% to 85% relative humidity.
- Recommended shipping conditions for up to one month duration are -5º C (23º F) to 45º C (113º F) at 20% to 85% relative humidity.
- To ensure the ribbon’s performance, our suggested storage conditions for up to one year duration are -5º C (23º F) to 40º C (104º F) at 20% to 85% relative humidity.
Please Note: Exposing Thermal Transfer Ribbons to direct sunlight or moisture will cause damage to the ribbons.
(Product data sheet - SP-330)