- Superior smudge and scratch resistance
- Good resistance to IPA and other household cleaners
- Moderate level of steam resistance
- Applications:
- Shipping, warehousing, and receiving labeling
- Shelf and bin labeling
- Compliance labeling
- Textile and apparel applications
- Nursery and lumber applications
- Flexible packaging applications
- Recommended Media:
- Coated paper tag and label stocks
- Polyethylene films
- Polypropylene films
- Polyester films
| Technical Specifications |
| Film Thickness: | 4.5 Microns | |
| Total Ribbon Thickness: | 7.5 Microns | |
| Transmission Density: | 1.30 MacBeth Scale | |
| Ink Melting Point: | 81º C 178º F |
|
| Recommended Maximum Print Speed: | 8 IPS |
| Star Diagram |
This diagram is representative of R2 Prime used in premium applications when printing on coated tag and label stocks and synthetic films.
| Storage Conditions |
To ensure optimal performance, please adhere to the following environmental conditions for use, shipping, and storage.
- For optimal print results, thermal transfer printing should occur in the temperature range of 5º C (41º F) to 35º C (95º F) at 45% to 85% relative humidity.
- Recommended shipping conditions for up to one month duration are -5º C (23º F) to 45º C (113º F) at 20% to 85% relative humidity.
- To ensure the ribbon’s performance, our suggested storage conditions for up to one year duration are -5º C (23º F) to 40º C (104º F) at 20% to 85% relative humidity.
Please Note: Exposing Thermal Transfer Ribbons to direct sunlight or moisture will cause damage to the ribbons.
(Product data sheet - R2 Prime)