- Excellent print quality at high print speeds
- Good coverage on uncoated paper tag and label stocks
- Reduced printhead energy requirements extend printhead life
- Applications:
- General purpose labeling
- Shipping, warehousing, and receiving labeling
- Print and apply applications
- Shipping and address labels
- Retail tag and label applications
- Apparel product labeling
- Compliance labeling
- Recommended Media:
- Uncoated paper tag and label stock
- Coated paper tag and label stock
| Technical Specifications |
| Film Thickness: | 4.5 Microns | |
| Total Ribbon Thickness: | 6.8 Microns | |
| Transmission Density: | 1.85 MacBeth Scale | |
| Ink Melting Point: | 64º C 147º F |
|
| Recommended Maximum Print Speed: | 12 IPS |
| Star Diagram |
This diagram is representative of Fast Wax used in general purpose applications when printing on coated tag and label stocks.
| Storage Conditions |
To ensure optimal performance, please adhere to the following environmental conditions for use, shipping, and storage.
- For optimal print results, thermal transfer printing should occur in the temperature range of 5º C (41º F) to 35º C (95º F) at 45% to 85% relative humidity.
- Recommended shipping conditions for up to one month duration are -5º C (23º F) to 45º C (113º F) at 20% to 85% relative humidity.
- To ensure the ribbon’s performance, our suggested storage conditions for up to one year duration are -5º C (23º F) to 40º C (104º F) at 20% to 85% relative humidity.
Please Note: Exposing Thermal Transfer Ribbons to direct sunlight or moisture will cause damage to the ribbons.
(Product data sheet - Fast Wax)